SN74CBT16292DGVR
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT16292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Bits | 12 |
| Throw Configuration | SPDT |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 11.3mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
SN74CBT16292DGVR Overview
This is a relatively small item of digital switch that is included in the 56-TFSOP (0.173, 4.40mm Width) in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers in the 74CBT series are suitable for a wide range of applications.The basic configuration includes 56 terminations.The base part number is 74CBT16292, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 5V is supplied.Signal switch has 56 component pins.As a result, GULL WING represents the end of the conductors.There is a type of supply of Single.It is configured with 56 pins.This unit is mounted in the way of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.There are 12 bits signal multiplexer provides.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.It is provided that 5V has a power supply in order to function normally.There are 2 outputs designed for the operation of the turn signal switch.This is an the digital switch ic that is classified as Other Logic ICs.In accordance with TR, switches can be packaged.It operates with a resistance of 10Ohm.
SN74CBT16292DGVR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74CBT16292DGVR Applications
There are a lot of Texas Instruments SN74CBT16292DGVR Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- Video transmission
- Speed control of medern motors
- Medium scale TV wall
- Memory system of computers
- Injectors
- Arithmetic Logic Units
- Used to connect a single source to multiple destinations
- Textile mills
- Enabling different rows of memory depending on address in memory chips
