SN74CBT16292DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBT16292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Operating Supply Current | 3μA |
| Load Capacitance | 50pF |
| Number of Bits | 12 |
| Throw Configuration | SPDT |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT16292DL Overview
In order to save board space, digital switch is located in the 56-BSSOP (0.295, 7.50mm Width).Tube represents its packaging.Mounting is performed using Surface Mount.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.As part of its basic configuration, 56 terminations are designed as a part of it.Its logic switch base part number is 74CBT16292 which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch contains 56 component pins.As a result, GULL WING represents the end of the conductors.In this case, Single is employed as the supply type.It is configured with 56 pins.It is mounted in the way of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer provides 12 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.For mux switch's normal operation, power supply 5V is provided.The turn signal switch has 2 outputs designed for operation.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.In terms of resistance, it has a value of 7Ohm.When the load is supplied with a voltage of 3μA, stability of the multiplexers can be maintained.
SN74CBT16292DL Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply current of 3μA
SN74CBT16292DL Applications
There are a lot of Texas Instruments SN74CBT16292DL Signal Switches / Multiplexers / Decoders applications.
- Paper plants
- A/D converters
- Code converters
- Idle motor
- GLAN
- Video transmission
- CNC machines
- Seven segment displays
- Used to connect a single source to multiple destinations
- Code conversion
