Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
48 |
Weight |
600.301152mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
Termination |
SMD/SMT |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
20 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74CBT16800 |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Max Output Current |
64mA |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
20 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
6.5 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.15 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
15.88mm |
Width |
7.49mm |
Thickness |
2.59mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT16800CDL Overview
Due to the fact that it is provided in the 48-BSSOP (0.295, 7.50mm Width), digital switch allows the board to be compacted.The package is packaged in accordance with Tube.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.As part of its basic configuration, 48 terminations are designed as a part of it.Its logic switch base part number is 74CBT16800 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThere are 48 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.This supply type employs Single.Currently, it is configured with a 48 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.As a result, signal multiplexer provides 20 bits.Vsup should be kept at 4V to prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.Bus Driver/Transceivers is a category for the digital switch ics.Without any external influences, it consumes 3μA current of multiplexer ic at all times.Using a supply voltage of 5V can result in reliable performance of the multiplexers.With a resistance of 0, it operates.12Ohm is the resistance at which it operates.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBT16800CDL Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16800CDL Applications
There are a lot of Texas Instruments SN74CBT16800CDL Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- GLAN
- RF-based home automation system
- LVDS
- Steel plants
- HD surveillance system
- Communication system
- CPU memory location identification
- Data bus control
- Injectors