SN74CBT16811CDGGR
| Parameters | |
|---|---|
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 24 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT16811 |
SN74CBT16811CDGGR Overview
In order to conserve board space, digital switch is included in the 56-TFSOP (0.240, 6.10mm Width).The package is packaged in accordance with Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .For the analog part of the multiplexers, an IC Bus Switch is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 4V~5.5V supply voltage.Multiplexers of the 74CBT series can be used in a wide range of applications.There is a design for terminating 56 as part of its basic configuration.As its base part number is 74CBT16811, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has 56 component pins.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.There are 56 pins on it.This unit is mounted in the way of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.As a result, signal multiplexer provides 24 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).A power supply is provided for mux switch's normal operation of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.There are no external influences on this multiplexer ic, so it consumes 3μA current.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The switches packaging is based on TR.A resistance of 2 is used to operate the signal switching.12Ohm is the resistance at which it operates.The output current of 64mA is provided for higher switches' flexibility.
SN74CBT16811CDGGR Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16811CDGGR Applications
There are a lot of Texas Instruments SN74CBT16811CDGGR Signal Switches / Multiplexers / Decoders applications.
- Data distribution
- Time division multiplexing system
- Enabling different functions units in microprocessor instruction decoding
- To select different devices in microprocessor input
- RF-based home automation system
- CPU memory location identification
- Night vision cameras
- Microprocessor memory systems
- Memory system of computers
- Recording transmission
