SN74CBT16811CDGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT16811 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 11.3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBT16811CDGVR Overview
Due to the lack of space on the board, digital switch is provided in the 56-TFSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4V~5.5V, designers have superior flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.It is designed with 56 terminations as part of its basic configuration.In addition, it also has a base part number of 74CBT16811, which can be used to find related parts.The multiplexer's system is powered by 5V volts.This turn signal switch contains 56 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.There are 56 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.There are 24 bits in signal multiplexer.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.It is provided that 5V has a power supply in order to function normally.This is an the digital switch ic that is classified as Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic since it is not affected by external factors.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The system operates with a resistance of 2.In terms of resistance, it has a value of 12Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBT16811CDGVR Features
Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16811CDGVR Applications
There are a lot of Texas Instruments SN74CBT16811CDGVR Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- Analog to digital conversion
- Data distribution
- Relay
- Frequency multiplexing system
- Data communication
- Microprocessor instruction decoding
- A/D converters
- Home automation system
- High-performance memory-decoding applications
