SN74CBT16861DGGR

48 Terminations4.5V~5.5V 48 Pin 74CBT16861 Signal switch74CBT Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT16861DGGR
Package: 48-TFSOP (0.240, 6.10mm Width)
Datasheet: -
Stock: 229
Description: 48 Terminations4.5V~5.5V 48 Pin 74CBT16861 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Circuit	10 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	20
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	3μA
Turn On Delay Time	8 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.001mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	12.5mm
Width	6.1mm
Thickness	1.15mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-TFSOP (0.240, 6.10mm Width)
Number of Pins	48
Weight	223.195796mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
ECCN Code	EAR99
Type	Bus Switch
Resistance	22Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74CBT16861
Pin Count	48
Qualification Status	Not Qualified
Operating Supply Voltage	5V

SN74CBT16861DGGR Overview

The reason it is provided is that the board space can be saved by placing digital switch in the 48-TFSOP (0.240, 6.10mm Width).It is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBT series can be used in a wide range of applications.As part of its basic configuration, 48 terminations are designed as a part of it.There is a base part number of 74CBT16861 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 5V voltage is supplied.This turn signal switch contains 48 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.A configuration of 48 pins is used.It is positioned in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 20 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.It is provided that 5V has a power supply in order to function normally.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.According to TR, the switches is packaged.A resistance of 2 governs its operation.This signal switching operates at a resistance of 22Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.