SN74CBT16861DGVR

48 Terminations4.5V~5.5V 48 Pin 74CBT16861 Signal switch74CBT Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT16861DGVR
Package: 48-TFSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 281
Description: 48 Terminations4.5V~5.5V 48 Pin 74CBT16861 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-TFSOP (0.173, 4.40mm Width)
Number of Pins	48
Weight	123.490523mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
ECCN Code	EAR99
Type	Bus Switch
Resistance	22Ohm
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.4mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74CBT16861
Pin Count	48
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Circuit	10 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	20
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	3μA
Turn On Delay Time	8 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.001mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	9.7mm
Width	4.4mm
Thickness	1.05mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBT16861DGVR Overview

In order to save board space, digital switch is located in the 48-TFSOP (0.173, 4.40mm Width).It is packaged in the way of Cut Tape (CT).The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses an analog IC Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.Since they are members of the 74CBT series, they can be used in a wide variety of applications.The basic configuration of this system includes 48 terminations.The base part number is 74CBT16861, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.Signal switch has 48 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, Single is employed as the supply type.There are 48 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 20 bits provided.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).There is a power supply provided for the mux switch's normal operation of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.Without external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The signal switching is packaged by TR. This signal switching operates at a resistance of 2.The system operates with a resistance of 22Ohm.The output current of 64mA is provided for higher switches' flexibility.