SN74CBT16861DL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 22Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBT16861 |
| Pin Count | 48 |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 15.875mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT16861DL Overview
In order to conserve board space, digital switch is included in the 48-BSSOP (0.295, 7.50mm Width).In this case, it is packaged as Tube.For mounting, digital switch ic uses the method Surface Mount.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 48 range.The base part number is 74CBT16861, so you can find its logic switch related parts using that number.The multiplexer is supplied with 5V voltage.Currently, this turn signal switch has a total of 48 component pins.Conductors terminate at GULL WING in this design.There is a type of supply Single that is employed in this case.There are 48 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.The multiplexer ic provides 20 bits.Keep Vsup at 4V to avoid unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic without external influences.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.A resistance of 2 governs its operation.This signal switching operates at a resistance of 22Ohm.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBT16861DL Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16861DL Applications
There are a lot of Texas Instruments SN74CBT16861DL Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Decimal decoder
- RF-based home automation system
- Encrypted communications system
- Data-routing applications
- Signal router
- Enabling different functions units in microprocessor instruction decoding
- D/A converters
- Image transmission
- Injectors
