SN74CBT16861DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 22Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT16861 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.001mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT16861DLR Overview
Providing this information in the 48-BSSOP (0.295, 7.50mm Width) enables digital switch board space to be saved.It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.As part of its basic configuration, 48 terminations are designed as a part of it.There is a base part number of 74CBT16861 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 48 components that can be connected to each pin.As a result, conductors end at GULL WING.There is a type of supply of Single.The board is configured with 48 pins.The multiplexer ic is mounted in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer consists of 20 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.For mux switch's normal operation, there is a power supply provided at 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic without external influences.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The signal switching is packaged by TR. The signal switching operates with a resistance of 2.22Ohm is the resistance at which it operates.For greater switches' flexibility, 64mA provides the output current.
SN74CBT16861DLR Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT16861DLR Applications
There are a lot of Texas Instruments SN74CBT16861DLR Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Enabling different rows of memory depending on address in memory chips
- Relay
- Transmission from the computer system of a satellite
- Data collection system
- War field flying robot with a night vision flying camera
- Microprocessor input/output systems
- A robotic vehicle with the metal detector
- Make half adder
- Analog to digital conversion
