SN74CBT1G125DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT1G125 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 1 |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Output Current | 64mA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 1μA |
| Turn On Delay Time | 5.5 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT1G125DBVR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the SC-74A, SOT-753.Cut Tape (CT) represents its packaging.Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBT series can be used in a wide range of applications.Among its basic features are 5 terminations.The base part number is 74CBT1G125, so you can find its logic switch related parts using that number.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 5 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.Currently, it is configured with 5 pins.Multiplexer ics are mounted in the direction of Surface Mount.In this signal multiplexer, there are 1 bits provided.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.Normally, 5V is powered by a battery.The part belongs to the Bus Driver/Transceivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 1μA current.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.Currently, the switches is packaged in accordance with the TR method.The resistance is 2.With a resistance of 20Ohm, it operates.The turn signal switch's circuit consists of 1 transmission channels.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT1G125DBVR Features
Supplied in the SC-74A, SOT-753 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT1G125DBVR Applications
There are a lot of Texas Instruments SN74CBT1G125DBVR Signal Switches / Multiplexers / Decoders applications.
- Video transmission
- Encrypted communications system
- VGA
- Data bus control
- Time division multiplexing system
- Home automation system
- CPU memory location identification
- Frequency multiplexing system
- Arithmetic Logic Units
- Data transfer
