Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Weight |
2.494758mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
20Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74CBT1G125 |
Pin Count |
5 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
1 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
1μA |
Number of Bits |
1 |
Throw Configuration |
SPST |
Propagation Delay |
5.5 ns |
Quiescent Current |
1μA |
Turn On Delay Time |
5.5 ns |
Output Characteristics |
3-STATE |
Supply Type |
Single |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT1G125DCKR Overview
It is included in the 5-TSSOP, SC-70-5, SOT-353 in order to save board space.The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers in the 74CBT series are suitable for a wide range of applications.Its basic configuration includes terminations in the 5 range.The base part number is 74CBT1G125, which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 5 component pins.Conductors terminate at GULL WING in this design.This supply type employs Single.A total of 5 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.There are 1 bits signal multiplexer provides.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).The power supply of 5V is provided for mux switch's normal operation.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 1μA current.The performance of the multiplexers can be reliably maintained at a voltage of 5V.In accordance with TR, switches can be packaged.A resistance of 2 is used to operate the signal switching.This signal switching operates at a resistance of 20Ohm.In mux switch configuration, there are 1 elements.
SN74CBT1G125DCKR Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT1G125DCKR Applications
There are a lot of Texas Instruments SN74CBT1G125DCKR Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Control unit of Central Processing unit (CPU)
- PCIe
- Paper plants
- Home automation system
- RF-based home automation system
- A robotic vehicle with the metal detector
- Logic gates for other digital devices
- Analog, digital or video signal switching
- HDMI applications