SN74CBT1G125DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT1G125 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Number of Bits | 1 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 5.5 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT1G125DCKT Overview
Digital switch is provided in the 5-TSSOP, SC-70-5, SOT-353 for the purpose of saving board space.As a result, it is packaged in the way of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 5 terminations are desgined.You can also find related parts by using its logic switch base part number of 74CBT1G125.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 5 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.This multiplexer ic has 5 pins configured.This unit is mounted in the way of Surface Mount.In this signal multiplexer, there are 1 bits that are provided.Keeping Vsup at 4V will prevent some unwanted failures.In order to maintain mux switch's normal operation, power is provided to 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.It consumes 1μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The signal switching is packaged by TR. The resistance of the signal switching is 2.As far as the resistance is concerned, it operates with 20Ohm.In the mux switch configuration, there are 1 elements.
SN74CBT1G125DCKT Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT1G125DCKT Applications
There are a lot of Texas Instruments SN74CBT1G125DCKT Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Memory system of computers
- D/A converters
- VGA
- Electronic circuits
- Make full adder
- Audio transmission
- Analog, digital or video signal switching
- Injectors
- PCIe
