SN74CBT1G384DCKR
| Parameters | |
|---|---|
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT1G384 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 1μA |
| Turn On Delay Time | 5.5 ns |
| Output Characteristics | 3-STATE |
SN74CBT1G384DCKR Overview
In order to save board space, digital switch is located in the 5-TSSOP, SC-70-5, SOT-353.The package is packaged in accordance with Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.There is a design for terminating 5 as part of its basic configuration.In addition, it also has a base part number of 74CBT1G384, which can be used to find related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 5 components that can be connected to each pin.As the end of conductors, it uses GULL WING.This supply type employs Single.Currently, it is configured with a 5 pin configuration.The mounting is in the way of Surface Mount.In the signal multiplexer, there are 1 bits available.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).A power supply is provided for mux switch's normal operation of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.No external influence consumes 1μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches package is packaged in a way which is consistent with TR.As far as the resistance is concerned, it operates with 2.The system operates with a resistance of 20Ohm.The configuration of the mux switch contains 1 elements.
SN74CBT1G384DCKR Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT1G384DCKR Applications
There are a lot of Texas Instruments SN74CBT1G384DCKR Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Microprocessor memory systems
- Encrypted communications system
- Data-routing applications
- Telephone network
- Home automation system
- D/A converters
- Enabling different functions units in microprocessor instruction decoding
- Automatic Monitoring systems
- RF-based home automation system
