Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Weight |
2.494758mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
Termination |
SMD/SMT |
Type |
Bus Switch |
Resistance |
20Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74CBT1G384 |
Pin Count |
5 |
Operating Supply Voltage |
5V |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
1 |
Number of Ports |
2 |
Nominal Supply Current |
1μA |
Output Current |
64mA |
Number of Bits |
1 |
Propagation Delay |
250 ps |
Quiescent Current |
1μA |
Turn On Delay Time |
5.5 ns |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Translation |
N/A |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
SN74CBT1G384DCKT Overview
Digital switch is provided in the 5-TSSOP, SC-70-5, SOT-353 for the purpose of saving board space.It is packaged according to the Tube method.For mounting, digital switch ic uses the method Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers of the 74CBT series can be used in a wide range of applications.This configuration includes 5 terminations as part of its basic functionality.The base part number is 74CBT1G384, which can also be used to find its logic switch related parts.The multiplexer is supplied with 5V voltage.A component pin count of 5 can be found on this turn signal switch.As the end of conductors, it uses GULL WING.Single is employed as its supply type.It is configured with 5 pins.This unit is mounted in the way of Surface Mount.As a result, signal multiplexer provides 1 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.Normally, 5V is powered by a battery.Bus Driver/Transceivers is the classification for this the digital switch ic.Without the influence of external factors, it consumes 1μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A TR packaging method is used in the switches.With a resistance of 0, it operates.As far as the resistance is concerned, it operates with 20Ohm.This turn signal switch's circuit is based on a circuit with 1 channels.For higher switches' flexibility, the output current is set to 64mA.
SN74CBT1G384DCKT Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT1G384DCKT Applications
There are a lot of Texas Instruments SN74CBT1G384DCKT Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Data communication
- Data demultiplexing
- Enabling different rows of memory depending on address in memory chips
- D/A converters
- Seven segment displays
- Data transfer
- HD surveillance system
- Data collection system
- Used to connect a single source to multiple destinations