SN74CBT3125CD

14 Terminations4.5V~5.5V 14 Pin 74CBT3125 Signal switch74CBT Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT3125CD
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 255
Description: 14 Terminations4.5V~5.5V 14 Pin 74CBT3125 Signal switch74CBT Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	122.413241mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Type	Bus Switch
Resistance	12Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	74CBT3125
Pin Count	14
Operating Supply Voltage	5V
Circuit	1 x 1:1
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Channels	4
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	4
Propagation Delay	150 ps
Quiescent Current	3μA
Turn On Delay Time	4.4 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Address Bus Width	4b
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.15 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBT3125CD Overview

For the purpose of saving board space, digital switch is included in the 14-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.Bus Switch is the analog IC that the multiplexers uses.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CBT series, which provide extensive application potential.Its basic configuration includes terminations in the 14 range.There is a base part number of 74CBT3125 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 5V is the voltage supplied.This turn signal switch consists of 14 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is employed as its supply type.The board is configured with 14 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 4 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.mux switch's normal operation requires the power supply of 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.This signal switching operates at a resistance of 12Ohm.A total of 4 transmission channels are available in the turn signal switch's circuit.It is possible to provide a current output of 64mA for greater switches' flexibility.