SN74CBT3125CDBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT3125 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 4 |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 0.15 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3125CDBQR Overview
Due to the fact that it is provided in the 16-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.the multiplexers uses IC Bus Switch as the analog IC.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 16 range.There is a base part number of 74CBT3125 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch consists of 16 component pins.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.A configuration of 16 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 4 bits that are provided.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order for 5V to operate normally, a power supply is provided.The part belongs to the Bus Driver/Transceiver category of signal switches.No external influence consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.The signal switching operates with a resistance of 2.With a resistance of 12Ohm, it operates.A total of 4 channels are used for transmission in the turn signal switch's circuit.For higher switches' flexibility, the output current is set to 64mA.
SN74CBT3125CDBQR Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3125CDBQR Applications
There are a lot of Texas Instruments SN74CBT3125CDBQR Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- To select different task for memory in microprocessor memory systems
- Decimal decoder
- Home automation system
- Medium scale TV wall
- Microprocessor instruction decoding
- Logic gates for other digital devices
- Data communication
- D/A converters
- A/D converters
