SN74CBT3125CDGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 41.787197mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT3125 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.2mm |
| Width | 3.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBT3125CDGVR Overview
As a means of saving space, digital switch is provided in the 14-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.The basic configuration of this system includes 14 terminations.In addition, it also has a base part number of 74CBT3125, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 5V.Currently, this turn signal switch has a total of 14 component pins.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.Currently, it is configured with 14 pins.The multiplexer ic is mounted in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.The multiplexer ic provides 4 bits.Keeping Vsup at 4V will prevent some unwanted failures.During mux switch's normal operation, 5V is provided with a power supply.Bus Driver/Transceivers is the classification for this the digital switch ic.No external influence consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.With a resistance of 12Ohm, it operates.In mux switch configuration, there are 4 elements.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBT3125CDGVR Features
Supplied in the 14-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3125CDGVR Applications
There are a lot of Texas Instruments SN74CBT3125CDGVR Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- HDMI applications
- Video transmission
- Microprocessor memory systems
- Idle motor
- Data communication
- Solenoid cooling fan
- CPU memory location identification
- Logic circuits
- GLAN
