Parameters |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
74CBT3125 |
Pin Count |
14 |
Operating Supply Voltage |
5V |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
4 |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
1 |
Propagation Delay |
150 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
4.4 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Address Bus Width |
4b |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.15 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
SN74CBT3125CPW Overview
For the purpose of saving board space, digital switch is included in the 14-TSSOP (0.173, 4.40mm Width).The package is in the form of Tube.Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.Multiplexers of the 74CBT series can be used in a wide range of applications.It is designed with 14 terminations as part of its basic configuration.There is a base part number of 74CBT3125 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 5V voltage.A component pin count of 14 can be found on this turn signal switch.As a result, conductors end at GULL WING.There is a type of supply of Single.With 14 pins, it is configured.The mounting is in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer contains 1 bits.Keep Vsup at 4V to avoid unnecessary failures.Normally, 5V is powered by a battery.This is a signal switch that is categorized as Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.As far as the resistance is concerned, it operates with 2.In terms of resistance, it has a value of 12Ohm.Transmission is carried out over 4 channels in the turn signal switch's circuit.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBT3125CPW Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3125CPW Applications
There are a lot of Texas Instruments SN74CBT3125CPW Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- High-performance memory-decoding applications
- Computer memory
- Enabling block of memory depending on address in memory chips
- Recording transmission
- Code conversion
- Idle motor
- Code converters
- Telephone network
- VGA