SN74CBT3125CPWRE4

14 Terminations4.5V~5.5V 14 Pin 74CBT3125 Signal switch74CBT Series 4 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT3125CPWRE4
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 849
Description: 14 Terminations4.5V~5.5V 14 Pin 74CBT3125 Signal switch74CBT Series 4 Functions(Kg)

Details

Tags

Parameters
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	59.987591mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Type	Bus Switch
Resistance	12Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Base Part Number	74CBT3125
Pin Count	14
Operating Supply Voltage	5V
Circuit	1 x 1:1
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Channels	4
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	1
Propagation Delay	150 ps
Quiescent Current	3μA
Turn On Delay Time	4.4 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.15 ns
High Level Output Current	-128mA
Low Level Output Current	128mA

SN74CBT3125CPWRE4 Overview

Digital switch is provided in the 14-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .For the analog part of the multiplexers, an IC Bus Switch is used.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.The multiplexers from 74CBT series can be used for a wide range of applications.The basic configuration includes 14 terminations.Its logic switch base part number is 74CBT3125 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 14 component pins.A conductor terminates at GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic has 14 pins configured.It is mounted in the way of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.In this signal multiplexer, there are 1 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.mux switch's normal operation requires the power supply of 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.No external influence consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A TR packaging method is used in the switches.The resistance of the signal switching is 2.A resistance of 12Ohm is used to operate the signal switching.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.For increased switches' flexibility, the output current of 64mA is provided.