Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
129.387224mg |
Manufacturer Package Identifier |
D(R-pdso-G14) |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceiver |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
74CBT3125 |
Pin Count |
14 |
Operating Supply Voltage |
5V |
Circuit |
1 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
4 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
4 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
6 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Drain to Source Resistance |
16Ohm |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3125D Overview
It is included in the 14-SOIC (0.154, 3.90mm Width) in order to save board space.The package is packaged in accordance with Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBT series can be used in a wide range of applications.As parts of its basic configuration, 14 terminations are desgined.There is a base part number 74CBT3125 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V voltage.This turn signal switch has a total of 14 component pins.It employs GULL WING as the point at which conductors come to an end.As a type of supply, Single is employed.There are 14 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 4 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.mux switch's normal operation requires the power supply of 5V.This is an the digital switch ic that is classified as Bus Driver/Transceiver.It consumes 3μA current of multiplexer ic without external influences.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The resistance is 2.With a resistance of 7Ohm, it operates.Transmission is carried out over 4 channels in the turn signal switch's circuit.For higher switches' flexibility, the output current is set to 64mA.
SN74CBT3125D Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3125D Applications
There are a lot of Texas Instruments SN74CBT3125D Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- Injectors
- Frequency multiplexing system
- High-performance memory-decoding applications
- Steel plants
- Speed control of medern motors
- Automatic Monitoring systems
- Audio transmission
- To select different devices in microprocessor output
- Data bus control