SN74CBT3125DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3125 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3125DBR Overview
In order to save board space, digital switch is located in the 14-SSOP (0.209, 5.30mm Width).Tape & Reel (TR) represents its packaging.Mounting is performed using Surface Mount.the multiplexers uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBT series can be used in a wide range of applications.There are 14 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74CBT3125 may also be used.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 14 components that can be connected to each pin.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.It is configured with 14 pins.The mounting is in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 4 bits available.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.A power supply is provided for mux switch's normal operation of 5V.This is an the digital switch ic that is classified as Bus Driver/Transceiver.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with the TR method.With a resistance of 0, it operates.The system operates with a resistance of 7Ohm.For transmission, there are 4 channels in the turn signal switch's circuit.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT3125DBR Features
Supplied in the 14-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3125DBR Applications
There are a lot of Texas Instruments SN74CBT3125DBR Signal Switches / Multiplexers / Decoders applications.
- Analog, digital or video signal switching
- War field flying robot with a night vision flying camera
- Electronic circuits
- Metal detectors
- D/A converters
- Logic gates for other digital devices
- Encrypted communications system
- Electronically controlled engine system
- Microprocessor instruction decoding
- To select different task for memory in microprocessor memory systems
