SN74CBT3125DR
| Parameters | |
|---|---|
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 74CBT3125 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
SN74CBT3125DR Overview
Digital switch is provided in the 14-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.Tape & Reel (TR) is the method used for packaging.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers from 74CBT series can be used for a wide range of applications.The basic configuration includes 14 terminations.In addition, it also has a base part number of 74CBT3125, which can be used to find related parts.The multiplexer is supplied with 5V voltage.Currently, this turn signal switch has a total of 14 component pins.GULL WING represents the end of conductors.As a type of supply, Single is employed.A configuration of 14 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer provides 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.For mux switch's normal operation, there is a power supply provided at 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.It consumes 3μA current of multiplexer ic without external influences.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches packaging is based on TR.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 7Ohm.The turn signal switch's circuit consists of 4 transmission channels.The output current of 64mA is provided for higher switches' flexibility.
SN74CBT3125DR Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3125DR Applications
There are a lot of Texas Instruments SN74CBT3125DR Signal Switches / Multiplexers / Decoders applications.
- Relay
- Analog, digital or video signal switching
- High-performance memory systems
- Data transfer
- Enabling block of memory depending on address in memory chips
- Arithmetic Logic Units
- Communication system
- Logic circuits
- Telephone network
- Frequency multiplexing system
