Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
74CBT3125 |
Pin Count |
14 |
Operating Supply Voltage |
5V |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
4 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
4 |
Propagation Delay |
6 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
6 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Drain to Source Resistance |
16Ohm |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3125PW Overview
In order to conserve board space, digital switch is included in the 14-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tube.Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.There are 14 terminations included in its basic configuration.As its base part number is 74CBT3125, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch has 14 component pins.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.It is configured with 14 pins.Multiplexer ics are mounted in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer provides 4 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.mux switch's normal operation requires the power supply of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.With a resistance of 7Ohm, it operates.The turn signal switch's circuit consists of 4 transmission channels.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT3125PW Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3125PW Applications
There are a lot of Texas Instruments SN74CBT3125PW Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Textile mills
- HDMI applications
- Video transmission
- Logic circuits
- Frequency multiplexing system
- PCIe
- Medical industry
- Robotic vehicles
- HD surveillance system