SN74CBT3125PWG4

14 Terminations4.5V~5.5V 14 Pin 74CBT3125 Signal switch74CBT Series 4 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT3125PWG4
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 777
Description: 14 Terminations4.5V~5.5V 14 Pin 74CBT3125 Signal switch74CBT Series 4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Base Part Number	74CBT3125
Pin Count	14
Operating Supply Voltage	5V
Circuit	1 x 1:1
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Channels	4
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	4
Propagation Delay	250 ps
Quiescent Current	3μA
Turn On Delay Time	350 ps
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBT3125PWG4 Overview

Digital switch is provided in the 14-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.It is packaged in the way of Tube.Mounting is performed using Surface Mount.In the multiplexers, the analog IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.There is a design for terminating 14 as part of its basic configuration.The base part number is 74CBT3125, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V voltage.This turn signal switch consists of 14 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, Single is employed as the supply type.There are 14 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 4 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).It is provided that 5V has a power supply in order to function normally.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without any external influences, it consumes 3μA current of multiplexer ic at all times.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The resistance of the signal switching is 2.A resistance of 7Ohm is used to operate it.Transmission is carried out over 4 channels in the turn signal switch's circuit.For higher switches' flexibility, the output current is set to 64mA.