SN74CBT3126DBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT3126 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 5.4 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.006mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3126DBQR Overview
Digital switch is provided in the 16-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.It is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.Bus Switch is the analog IC that the multiplexers uses.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.Among its basic features are 16 terminations.The base part number is 74CBT3126, so you can find its logic switch related parts using that number.For multiplexer's system, 5V voltage is supplied.There are 16 component pins in this turn signal switch.Conductors terminate at GULL WING in this design.There is a type of supply Single that is employed in this case.The board is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In this signal multiplexer, there are 4 bits provided.Keeping Vsup at 4V will prevent some unwanted failures.For mux switch's normal operation, power supply 5V is provided.The part belongs to the Bus Driver/Transceivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 3μA current.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.Currently, the switches is packaged in accordance with the TR method.The resistance of the signal switching is 2.In terms of resistance, it has a value of 7Ohm.This turn signal switch's circuit is based on a circuit with 4 channels.64mA provides a high degree of switches' flexibility.
SN74CBT3126DBQR Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3126DBQR Applications
There are a lot of Texas Instruments SN74CBT3126DBQR Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Data demultiplexing
- Used to connect a single source to multiple destinations
- Data collection system
- Small scale TV wall
- Night vision cameras
- Enabling different rows of memory depending on address in memory chips
- Electronically controlled engine system
- A/D converters
- Speed synchronization of multiple motors in industries
