SN74CBT3126DBQRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3126DBQRE4 Overview
Digital switch is provided in the SSOP for the purpose of saving board space.Tape and Reel is the packaging method.Among its basic features are 16 terminations.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 4 bits.In order for 5V to operate normally, a power supply is provided.This is an the digital switch ic that is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A resistance of 2 governs its operation.The resistance of the signal switching is 7Ohm.This turn signal switch's circuit uses 4 transmission channels.A maximum temperature of 85°C is acceptable for this signal switch.The minimal operating temperature of the multiplexer should be maintained at -40°C.According to the applicable device specification, the signal switches operates at a maximum supply voltage of 5.5V.The digital swith is specified to operate at the minimum supply voltage of 4V in compliance with the applicable device specification.In addition, it provides improved characteristics compared to BUS SWITCH.It employs BUS DRIVER as its logic IC.
SN74CBT3126DBQRE4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS SWITCH
BUS DRIVER as the logic IC
SN74CBT3126DBQRE4 Applications
There are a lot of Texas Instruments SN74CBT3126DBQRE4 Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Electronic circuits
- To select different task for memory in microprocessor memory systems
- High-performance memory systems
- Data-routing applications
- Data communication
- Data distribution
- Video transmission
- Recording transmission
- Memory chips
