SN74CBT3126DBQRG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Control Type | ENABLE HIGH |
| Power Supply Current-Max (ICC) | 0.006mA |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3126DBQRG4 Overview
Due to the lack of space on the board, digital switch is provided in the SSOP.It is packaged according to the Tape and Reel method.It is designed with 16 terminations as part of its basic configuration.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 16 is found on this turn signal switch.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.This multiplexer ic is configured with 16 pins.This unit is mounted in the way of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 4 bits.mux switch's normal operation requires the power supply of 5V.Bus Driver/Transceivers is a category for the digital switch ics.It consumes 3μA current of multiplexer ic without external influences.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The switches package is packaged in accordance with TR.The system operates with a resistance of 2.This signal switching operates at a resistance of 7Ohm.This turn signal switch's circuit is based on a circuit with 4 channels.85°C is an acceptable maximum temperature for this signal switch.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.The device is specified to operate at the maximum supply voltage of 5.5V in accordance with its applicable specification.The digital swith is specified to operate at the minimum supply voltage of 4V in compliance with the applicable device specification.It uses IC BUS DRIVER for its logic.
SN74CBT3126DBQRG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBT3126DBQRG4 Applications
There are a lot of Texas Instruments SN74CBT3126DBQRG4 Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Enabling different functions units in microprocessor instruction decoding
- Make half adder
- Enabling different rows of memory depending on address in memory chips
- Decimal decoder
- To select different task for memory in microprocessor memory systems
- Metal detectors
- Medical industry
- Communication system
- Microprocessor instruction decoding
