SN74CBT3126DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 41.787197mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT3126 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 250mA |
| Output Current | 64mA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.2mm |
| Width | 3.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3126DGVR Overview
Providing this information in the 14-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CBT series, which provide extensive application potential.As part of its basic configuration, 14 terminations are designed as a part of it.There is a base part number of 74CBT3126 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 5V voltage.There are 14 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The supply type of this multiplexer ic is Single.With 14 pins, it is configured.It is positioned in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.In this signal multiplexer, there are 4 bits that are provided.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.For mux switch's normal operation, power supply 5V is provided.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.A resistance of 2 is used to operate the signal switching.With a resistance of 7Ohm, it operates.This mux switch configuration has 4 elements.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT3126DGVR Features
Supplied in the 14-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3126DGVR Applications
There are a lot of Texas Instruments SN74CBT3126DGVR Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Textile mills
- Data communication
- A robotic vehicle with the metal detector
- Steel plants
- Communication system
- High-performance memory-decoding applications
- Electronic circuits
- Signal router
- HDMI applications
