SN74CBT3126DGVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 41.787197mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT3126 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.2mm |
| Width | 3.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3126DGVRE4 Overview
This is a relatively small item of digital switch that is included in the 14-TFSOP (0.173, 4.40mm Width) in order to save space on the board.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 14 terminations.The base part number is 74CBT3126, which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 14 component pins.A conductor terminates at GULL WING.Single is used as its supply type.A configuration of 14 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 4 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A resistance of 2 is used to operate the signal switching.A resistance of 7Ohm is used to operate the signal switching.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT3126DGVRE4 Features
Supplied in the 14-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3126DGVRE4 Applications
There are a lot of Texas Instruments SN74CBT3126DGVRE4 Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Speed synchronization of multiple motors in industries
- Idle motor
- Control unit of Central Processing unit (CPU)
- Encrypted communications system
- To select different devices in microprocessor input
- Audio transmission
- Electronics industry
- Make full adder
- Medical industry
