SN74CBT32245GKER
| Parameters | |
|---|---|
| Propagation Delay | 250 ps |
| Quiescent Current | 6μA |
| Turn On Delay Time | 7.7 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Length | 13.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 96 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | 74CBT32245 |
| Pin Count | 96 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 32 |
SN74CBT32245GKER Overview
In order to conserve board space, digital switch is included in the 96-LFBGA.In this case, it is packaged as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.the multiplexers uses IC Bus Switch as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.These multiplexers are members of the 74CBT series, which provide extensive application potential.The basic configuration of this system includes 96 terminations.There is a base part number of 74CBT32245 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 96 can be found on this turn signal switch.As the end of conductors, it uses BALL.In this case, the supply type is Single.Currently, it is configured with a 96 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer provides 32 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.mux switch's normal operation requires the power supply of 5V.Bus Driver/Transceivers is a category for the digital switch ics.It consumes 6μA current of multiplexer ic without external influences.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.2 ports are used for some other peripheral signal switchings to plug in.7Ohm is the resistance at which it operates.
SN74CBT32245GKER Features
Supplied in the 96-LFBGA package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT32245GKER Applications
There are a lot of Texas Instruments SN74CBT32245GKER Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- PCIe
- Solenoid cooling fan
- High-performance memory systems
- Transmission from the computer system of a satellite
- Data transfer
- Data collection system
- Memory chips
- Telephone network
- HDMI applications
