Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
96-LFBGA |
Number of Pins |
96 |
Weight |
166.610147mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
96 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.8mm |
Base Part Number |
74CBT32245 |
Pin Count |
96 |
Operating Supply Voltage |
5V |
Circuit |
8 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
32 |
Propagation Delay |
7.7 ns |
Quiescent Current |
6μA |
Turn On Delay Time |
7.7 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.06mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
4 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.4mm |
Length |
13.5mm |
Width |
5.5mm |
Thickness |
850μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT32245ZKER Overview
Due to the fact that it is provided in the 96-LFBGA, digital switch allows the board to be compacted.The package is packaged in the manner of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.As part of its basic configuration, 96 terminations are designed as a part of it.The base part number is 74CBT32245, which is also useful when looking up signal switch's related components.For multiplexer's system, 5V voltage is supplied.Currently, this turn signal switch has a total of 96 component pins.As a result, conductors end at BALL.There is a type of supply of Single.Currently, it is configured with a 96 pin configuration.This unit is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 32 bits.Vsup should be kept at 4V to prevent some unnecessary failures.mux switch's normal operation requires the power supply of 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 6μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The switches is packaged according to the way of TR.The system operates with a resistance of 2.With a resistance of 7Ohm, it operates.The output current of 64mA is provided for higher switches' flexibility.
SN74CBT32245ZKER Features
Supplied in the 96-LFBGA package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT32245ZKER Applications
There are a lot of Texas Instruments SN74CBT32245ZKER Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- To select different task for memory in microprocessor memory systems
- Injectors
- LVDS
- D/A converters
- Data bus control
- A robotic vehicle with the metal detector
- Memory system of computers
- Signal router
- Make full adder