SN74CBT3244CDBQR

20 Terminations4V~5.5V 20 Pin 74CBT3244 Signal switch74CBT Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT3244CDBQR
Package: 20-SSOP (0.154, 3.90mm Width)
Datasheet: -
Stock: 218
Description: 20 Terminations4V~5.5V 20 Pin 74CBT3244 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SSOP (0.154, 3.90mm Width)
Number of Pins	20
Weight	125.786834mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	20
ECCN Code	EAR99
Type	Bus Switch
Resistance	12Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceiver
Packing Method	TR
Technology	CMOS
Voltage - Supply	4V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.635mm
Base Part Number	74CBT3244
Pin Count	20
Operating Supply Voltage	5V
Circuit	4 x 1:1
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	8
Throw Configuration	SPST
Propagation Delay	5.7 ns
Quiescent Current	3μA
Turn On Delay Time	5.7 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.15 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.05mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.75mm
Length	8.65mm
Width	3.9mm
Thickness	1.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBT3244CDBQR Overview

This is a relatively small item of digital switch that is included in the 20-SSOP (0.154, 3.90mm Width) in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.Among its basic configurations are 20 terminations.Its logic switch base part number is 74CBT3244 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 20 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.This supply type employs Single.With 20 pins, it is configured.The mounting point is Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.There is a power supply provided for the mux switch's normal operation of 5V.Bus Driver/Transceiver is a category for the digital switch ics.Without any external influences, it consumes 3μA current of multiplexer ic at all times.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The signal switching is packaged by TR. A resistance of 2 governs its operation.With a resistance of 12Ohm, it operates.Higher switches' flexibility is provided by providing 64mA as the output current.