SN74CBT3244CDBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3244 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3244CDBR Overview
Providing this information in the 20-SSOP (0.209, 5.30mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the packaging method.The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBT series, they can be used in a wide variety of applications.Among its basic configurations are 20 terminations.As its base part number is 74CBT3244, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 5V.Signal switch has 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.The board has 20 pins configured.The mount is in Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.There are 8 bits signal multiplexer provides.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.There is a power supply provided for the mux switch's normal operation of 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.The resistance of the signal switching is 12Ohm.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBT3244CDBR Features
Supplied in the 20-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3244CDBR Applications
There are a lot of Texas Instruments SN74CBT3244CDBR Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- CPU memory location identification
- A robotic vehicle with the metal detector
- D/A converters
- Home automation system
- Arithmetic Logic Units
- Injectors
- A/D converters
- Paper plants
- Automatic Monitoring systems
