Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBT3244 |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Circuit |
4 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
150 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
5.7 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.15 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.05mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3244CPW Overview
It is included in the 20-TSSOP (0.173, 4.40mm Width) in order to save board space.Tube represents its packaging.Mounting is performed using Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4V~5.5V, designers have superior flexibility.Multiplexers in the 74CBT series are suitable for a wide range of applications.The basic configuration of this system includes 20 terminations.The base part number is 74CBT3244, which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.Signal switch has 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.With 20 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.For mux switch's normal operation, power supply 5V is provided.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.This signal switching operates at a resistance of 2.In terms of resistance, it has a value of 12Ohm.64mA provides a high degree of switches' flexibility.
SN74CBT3244CPW Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3244CPW Applications
There are a lot of Texas Instruments SN74CBT3244CPW Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Logic circuits
- Audio transmission
- CPU memory location identification
- Memory system of computers
- HD surveillance system
- VGA
- Automation system
- Electronic circuits
- Microprocessor instruction decoding