SN74CBT3244CPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3244 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 5.7 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.7 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 0.15 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.05mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3244CPWR Overview
As a means of saving space, digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.For the analog part of the multiplexers, an IC Bus Switch is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74CBT series multiplexers.There are 20 terminations included in its basic configuration.There is a base part number of 74CBT3244 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 20 can be found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.This multiplexer ic is configured with 20 pins.It is positioned in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer contains 8 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.It is provided that 5V has a power supply in order to function normally.Bus Driver/Transceivers is a category for the digital switch ics.No external influence consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches packaging is based on TR.The resistance is 2.The system operates with a resistance of 12Ohm.The output current of 64mA is provided for higher switches' flexibility.
SN74CBT3244CPWR Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3244CPWR Applications
There are a lot of Texas Instruments SN74CBT3244CPWR Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Enabling block of memory depending on address in memory chips
- Injectors
- Audio transmission
- Medical industry
- To select different devices in microprocessor input
- HD surveillance system
- Data bus control
- VGA
- Microprocessor memory systems
