Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.209, 5.30mm Width) |
Number of Pins |
20 |
Weight |
156.687814mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBT3244 |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Circuit |
4 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
50μA |
Output Current |
64mA |
Number of Bits |
8 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
50μA |
Turn On Delay Time |
8.9 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Height |
2mm |
Length |
7.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3244DBR Overview
It is included in the 20-SSOP (0.209, 5.30mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.The multiplexers from 74CBT series can be used for a wide range of applications.There are 20 terminations included in its basic configuration.Its logic switch base part number is 74CBT3244 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 20 component pins.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.It is configured with 20 pins.The mounting point is Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 8 bits.In order to maintain mux switch's normal operation, power is provided to 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 50μA current.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.A TR packaging method is used in the switches.As far as the resistance is concerned, it operates with 2.The system operates with a resistance of 7Ohm.For higher switches' flexibility, the output current is set to 64mA.
SN74CBT3244DBR Features
Supplied in the 20-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3244DBR Applications
There are a lot of Texas Instruments SN74CBT3244DBR Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- Automatic health monitoring systems
- CPU memory location identification
- HDMI applications
- Recording transmission
- Electronically controlled engine system
- To select different devices in microprocessor output
- Paper plants
- Make half adder
- Data bus control