Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
74CBT3244 |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Circuit |
4 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
50μA |
Output Current |
64mA |
Number of Bits |
8 |
Throw Configuration |
SPST |
Propagation Delay |
8.9 ns |
Quiescent Current |
50μA |
Turn On Delay Time |
8.9 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3244DWR Overview
As a means of saving space, digital switch is provided in the 20-SOIC (0.295, 7.50mm Width).The package is packaged in accordance with Cut Tape (CT).The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.Among its basic features are 20 terminations.Its logic switch base part number is 74CBT3244 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 20 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Single is employed.Currently, it is configured with 20 pins.The mounting is in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 8 bits that are provided.A power supply is provided for mux switch's normal operation of 5V.This is a signal switch that is categorized as Bus Driver/Transceivers.No external influence consumes 50μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The switches is packaged according to the way of TR.The signal switching operates with a resistance of 2.As far as the resistance is concerned, it operates with 7Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBT3244DWR Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3244DWR Applications
There are a lot of Texas Instruments SN74CBT3244DWR Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Electronically controlled engine system
- GLAN
- Medium scale TV wall
- Solenoid cooling fan
- Memory system of computers
- Audio transmission
- Used to connect a single source to multiple destinations
- Speed control of medern motors
- Paper plants