SN74CBT3244PW
| Parameters | |
|---|---|
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 8.9 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3244 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
SN74CBT3244PW Overview
In order to conserve board space, digital switch is included in the 20-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tube.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sAs a member of 74CBT series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 20 range.As its base part number is 74CBT3244, logic switch can also be used to find its related parts.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 20 components that can be connected to each pin.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.The board has 20 pins configured.It is mounted in the way of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.In the signal multiplexer, there are 8 bits available.During mux switch's normal operation, 5V is provided with a power supply.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 50μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The resistance of the signal switching is 2.This signal switching operates at a resistance of 7Ohm.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBT3244PW Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3244PW Applications
There are a lot of Texas Instruments SN74CBT3244PW Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Telephone network
- Communication system
- CNC machines
- Medium scale TV wall
- To select different devices in microprocessor output
- Microprocessor memory systems
- Make full adder
- Automatic health monitoring systems
- Code conversion
