banner_page

SN74CBT3244PWE4

20 Terminations20 Pin Signal switch2 FunctionsMin 4.5V VMax 5.5V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBT3244PWE4
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 110
  • Description: 20 Terminations20 Pin Signal switch2 FunctionsMin 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Resistance 7Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature TTL COMPATIBLE BUS SWITCH
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Pin Count 20
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 50μA
Current - Output 64mA
Number of Bits 8
Propagation Delay 250 ps
Quiescent Current 50μA
Turn On Delay Time 8.9 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 200MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -128mA
Low Level Output Current 128mA
Independent Circuits 2
Length 6.5mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74CBT3244PWE4 Overview


For the purpose of saving board space, digital switch is included in the TSSOP.Rail/Tube is the packaging method.It is designed with 20 terminations as part of its basic configuration.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 20 is found on this turn signal switch.As a result, conductors end at GULL WING.In this case, the supply type is Single.A configuration of 20 pins is used.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 8 bits.During mux switch's normal operation, 5V is provided with a power supply.This is an the digital switch ic that is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 50μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.With a resistance of 7Ohm, it operates.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.According to the applicable device specification, the signal switches operates at a maximum supply voltage of 5.5V.Device specifications require that the digital swith operate at a minimum supply voltage of 4.5V.It also provides improved characteristics of TTL COMPATIBLE BUS SWITCH.IC BUS DRIVER is used for the logic of this chip.

SN74CBT3244PWE4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC

SN74CBT3244PWE4 Applications


There are a lot of Texas Instruments SN74CBT3244PWE4 Signal Switches / Multiplexers / Decoders applications.

  • Code conversion
  • Metal detectors
  • To select different devices in microprocessor input
  • Recording transmission
  • Medical industry
  • Microprocessor instruction decoding
  • Injectors
  • Electronically controlled engine system
  • Enabling block of memory depending on address in memory chips
  • Encrypted communications system

Write a review

Note: HTML is not translated!
    Bad           Good