SN74CBT3244PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3244 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 8.9 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 8.9 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3244PWR Overview
For the purpose of saving board space, digital switch is included in the 20-TSSOP (0.173, 4.40mm Width).It is packaged according to the Cut Tape (CT) method.Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sSince they are members of the 74CBT series, they can be used in a wide variety of applications.Among its basic features are 20 terminations.Its logic switch base part number is 74CBT3244 which can also be used to find its logic switch related parts.The multiplexer is supplied with 5V voltage.This turn signal switch has 20 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.A total of 20 pins are configured on this board.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 8 bits in signal multiplexer.A power supply is provided for mux switch's normal operation of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceiver category.Without the influence of external factors, it consumes 50μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.Currently, the switches is packaged in accordance with the TR method.2 ports are used for some other peripheral signal switchings to plug in.7Ohm is the resistance at which it operates.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBT3244PWR Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3244PWR Applications
There are a lot of Texas Instruments SN74CBT3244PWR Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Medical industry
- Analog, digital or video signal switching
- Signal router
- Make half adder
- Data communication
- Used to connect a single source to multiple destinations
- Encrypted communications system
- Solenoid cooling fan
- Code converters
