SN74CBT3244PWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3244 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 8.9 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3244PWRE4 Overview
Due to the fact that it is provided in the 20-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged in the way of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.This configuration includes 20 terminations as part of its basic functionality.The base part number is 74CBT3244, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 20 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is employed as its supply type.A configuration of 20 pins is used.Surface Mount is the way it is mounted.The logic switch is a member of the family of CBT/FST/QS/5C/B.There are 8 bits signal multiplexer provides.There is a power supply provided for the mux switch's normal operation of 5V.Bus Driver/Transceivers is a category for the digital switch ics.There are no external influences on this multiplexer ic, so it consumes 50μA current.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.2 is the resistance at which it operates.A resistance of 7Ohm is used to operate it.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBT3244PWRE4 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3244PWRE4 Applications
There are a lot of Texas Instruments SN74CBT3244PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- Small scale TV wall
- Textile mills
- Encrypted communications system
- Idle motor
- High-performance memory-decoding applications
- Automatic health monitoring systems
- Frequency multiplexing system
- Memory system of computers
- To select different task for memory in microprocessor memory systems
