SN74CBT3244RGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT3244 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 8.9 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3244RGYR Overview
Due to the lack of space on the board, digital switch is provided in the 20-VFQFN Exposed Pad.In this case, it is packaged as Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBT series can be used in a wide range of applications.The basic configuration includes 20 terminations.To find signal switch's related components, a base part number of 74CBT3244 may also be used.The multiplexer's system is powered by 5V voltage.Currently, this turn signal switch has a total of 20 component pins.There is a type of supply of Single.A total of 20 pins are configured on this board.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.The multiplexer ic provides 8 bits.For mux switch's normal operation, there is a power supply provided at 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.Without the influence of external factors, it consumes 50μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The signal switching is packaged by TR. A resistance of 2 is used to operate the signal switching.A resistance of 7Ohm is used to operate it.64mA provides a high degree of switches' flexibility.
SN74CBT3244RGYR Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3244RGYR Applications
There are a lot of Texas Instruments SN74CBT3244RGYR Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- LVDS
- A robotic vehicle with the metal detector
- Steel plants
- Data transfer
- Signal router
- Data-routing applications
- HD surveillance system
- Code conversion
- Home automation system
