SN74CBT3245ADGVR

20 Terminations4V~5.5V 20 Pin 74CBT3245 Signal switch74CBT Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT3245ADGVR
Package: 20-TFSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 390
Description: 20 Terminations4V~5.5V 20 Pin 74CBT3245 Signal switch74CBT Series 1 Functions(Kg)

Details

Tags

Parameters
Propagation Delay	6.4 ns
Quiescent Current	50μA
Turn On Delay Time	6.4 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1.05mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TFSOP (0.173, 4.40mm Width)
Number of Pins	20
Weight	60.186038mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.4mm
Base Part Number	74CBT3245
Pin Count	20
Operating Supply Voltage	5V
Circuit	8 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	50μA
Output Current	64mA
Number of Bits	8
Throw Configuration	SPST

SN74CBT3245ADGVR Overview

Due to the fact that it is provided in the 20-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.The basic configuration of this system includes 20 terminations.In addition, it also has a base part number of 74CBT3245, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 20 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.A total of 20 pins are configured on this board.It is positioned in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.As a result, signal multiplexer provides a total of 8 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order for 5V to operate normally, a power supply is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.There are no external influences on this multiplexer ic, so it consumes 50μA current.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches package is packaged in accordance with the TR method.As far as the resistance is concerned, it operates with 2.With a resistance of 7Ohm, it operates.For higher switches' flexibility, the output current is set to 64mA.