SN74CBT3245ADW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 6.4 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3245ADW Overview
In order to save board space, digital switch is located in the 20-SOIC (0.295, 7.50mm Width).Tube represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 4V~5.5V, designers have superior flexibility.The multiplexers from 74CBT series can be used for a wide range of applications.It is designed with 20 terminations as part of its basic configuration.There is a base part number 74CBT3245 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 5V voltage.This turn signal switch consists of 20 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.Currently, it is configured with 20 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 8 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).For mux switch's normal operation, there is a power supply provided at 5V.This is a signal switch that is categorized as Bus Driver/Transceiver.Not being affected by the external factors, consumes 50μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.2 ports are used for some other peripheral signal switchings to plug in.The resistance of the signal switching is 7Ohm.For greater switches' flexibility, 64mA provides the output current.
SN74CBT3245ADW Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3245ADW Applications
There are a lot of Texas Instruments SN74CBT3245ADW Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- RF-based home automation system
- To select different devices in microprocessor input
- To select different devices in microprocessor output
- Implementing boolean functions with multiple variables
- Seven segment displays
- CPU memory location identification
- Frequency multiplexing system
- Microprocessor instruction decoding
- Textile mills
