Parameters |
Turn On Delay Time |
6.4 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Subcategory |
Bus Driver/Transceiver |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74CBT3245 |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Circuit |
8 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
50μA |
Output Current |
64mA |
Number of Bits |
8 |
Throw Configuration |
SPST |
Propagation Delay |
6.4 ns |
Quiescent Current |
50μA |
SN74CBT3245ADWR Overview
It is included in the 20-SOIC (0.295, 7.50mm Width) in order to save board space.The package is in the form of Cut Tape (CT).The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 4V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.The basic configuration of this system includes 20 terminations.You can also find related parts by using its logic switch base part number of 74CBT3245.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is used as its supply type.Currently, it is configured with 20 pins.The mounting point is Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 8 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceiver.In the absence of external influences, it consumes 50μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The switches is packaged according to the way of TR.As far as the resistance is concerned, it operates with 2.With a resistance of 7Ohm, it operates.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBT3245ADWR Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3245ADWR Applications
There are a lot of Texas Instruments SN74CBT3245ADWR Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- Time division multiplexing system
- A/D converters
- Make full adder
- Seven segment displays
- Implementing boolean functions with multiple variables
- Logic circuits
- Steel plants
- Data bus control
- Automatic Monitoring systems