Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBT3245 |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Circuit |
8 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
50μA |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
250 ps |
Quiescent Current |
50μA |
Turn On Delay Time |
6.4 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3245APWE4 Overview
It is included in the 20-TSSOP (0.173, 4.40mm Width) in order to save board space.The package is in the form of Tube.Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBT series can be used in a wide range of applications.Among its basic configurations are 20 terminations.The base part number is 74CBT3245, so you can find its logic switch related parts using that number.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 20 component pins.Conductors terminate at GULL WING in this design.This supply type employs Single.There are 20 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.The multiplexer ic provides 8 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 50μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.2 ports are used for some other peripheral signal switchings to plug in.As far as the resistance is concerned, it operates with 7Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBT3245APWE4 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3245APWE4 Applications
There are a lot of Texas Instruments SN74CBT3245APWE4 Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Injectors
- Telephone network
- Automatic Monitoring systems
- Small scale TV wall
- PCIe
- Idle motor
- Automatic health monitoring systems
- Logic gates for other digital devices
- Solenoid cooling fan