SN74CBT3245APWRG4

20 Terminations4V~5.5V 20 Pin 74CBT3245 Signal switch74CBT Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT3245APWRG4
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 499
Description: 20 Terminations4V~5.5V 20 Pin 74CBT3245 Signal switch74CBT Series 1 Functions(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Number of Pins	20
Weight	76.997305mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Voltage - Supply	4V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	74CBT3245
Pin Count	20
Operating Supply Voltage	5V
Circuit	8 x 1:1
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Ports	2
Nominal Supply Current	50μA
Output Current	64mA
Number of Bits	8
Propagation Delay	250 ps
Quiescent Current	50μA
Turn On Delay Time	6.4 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Height	1.15mm
Length	6.5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBT3245APWRG4 Overview

Due to the lack of space on the board, digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBT series, they can be used in a wide variety of applications.There is a design for terminating 20 as part of its basic configuration.There is a base part number of 74CBT3245 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 20 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.Currently, it is configured with a 20 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 8 bits available.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.It is provided that 5V has a power supply in order to function normally.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.In the absence of external influences, it consumes 50μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.This signal switching operates at a resistance of 2.The system operates with a resistance of 7Ohm.For higher switches' flexibility, the output current is set to 64mA.