Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74CBT3245 |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Circuit |
8 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
8 |
Throw Configuration |
SPST |
Propagation Delay |
150 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
5.3 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3245CDWR Overview
Providing this information in the 20-SOIC (0.295, 7.50mm Width) enables digital switch board space to be saved.The package is in the form of Tape & Reel (TR).Mounting is performed using Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 20 terminations.The part number for 74CBT3245 can be used to find its logic switch related parts as well.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch contains 20 component pins.A conductor terminates at GULL WING.In this case, the supply type is Single.With 20 pins, it is configured.The mounting point is Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer provides 8 bits.Keeping Vsup at 4V will prevent some unwanted failures.The power supply of 5V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.Currently, the switches is packaged in accordance with the TR method.The resistance of the signal switching is 2.In terms of resistance, it has a value of 12Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBT3245CDWR Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3245CDWR Applications
There are a lot of Texas Instruments SN74CBT3245CDWR Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- Make half adder
- Arithmetic Logic Units
- Implementing boolean functions with multiple variables
- Home automation system
- Combinational circuit
- Encrypted communications system
- Electronics industry
- Metal detectors
- Audio transmission