SN74CBT3245CRGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.3 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Nominal Input Voltage | 2V |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3245CRGYR Overview
Digital switch is provided in the 20-VFQFN Exposed Pad for the purpose of saving board space.It is packaged according to the Tape & Reel (TR) method.Mounting is performed using Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers from 74CBT series can be used for a wide range of applications.It is designed with 20 terminations as part of its basic configuration.There is a base part number of 74CBT3245 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 5V voltage.A component pin count of 20 is found on this turn signal switch.In this case, Single is employed as the supply type.The board has 20 pins configured.This unit is mounted in the way of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer provides 8 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order to maintain mux switch's normal operation, power is provided to 5V.Bus Driver/Transceivers is a category for the digital switch ics.It consumes 3μA current of multiplexer ic since it is not affected by external factors.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The switches package is packaged in a way which is consistent with TR.The system operates with a resistance of 2.With a resistance of 12Ohm, it operates.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBT3245CRGYR Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3245CRGYR Applications
There are a lot of Texas Instruments SN74CBT3245CRGYR Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Logic circuits
- Decimal decoder
- Used to connect a single source to multiple destinations
- Data distribution
- A/D converters
- A robotic vehicle with the metal detector
- Communication system
- To select different devices in microprocessor output
- Seven segment displays
