banner_page

SN74CBT3251PWRG4

16 Terminations16 Pin Signal switch8 Outputs1 FunctionsMin 4V VMax 5.5V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBT3251PWRG4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 879
  • Description: 16 Terminations16 Pin Signal switch8 Outputs1 FunctionsMin 4V VMax 5.5V V(Kg)

Details

Tags

Parameters
Output Polarity TRUE
Logic IC Type MULTIPLEXER AND DEMUX/DECODER
High Level Output Current -128mA
Low Level Output Current 128mA
Height 1.15mm
Length 5mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case TSSOP
Number of Pins 16
Weight 61.887009mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 16
Resistance 15Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Other Logic ICs
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Pin Count 16
Number of Outputs 8
Operating Supply Voltage 5V
Number of Elements 1
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4V
Operating Supply Current 3μA
Number of Bits 8
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 6.8 ns
Family CBT/FST/QS/5C/B
Logic Function Demultiplexer, Multiplexer
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 200MHz

SN74CBT3251PWRG4 Overview


The reason it is provided is that the board space can be saved by placing digital switch in the TSSOP.As a result, it is packaged in a way that is referred to as Tape and Reel.Among its basic features are 16 terminations.The multiplexer's system is supplied with a voltage of 5V.Currently, this turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 8 bits.A power supply is provided for mux switch's normal operation of 5V.This turn signal switch has 8 outputs designed for its operation.In electronic terms, the digital switch ic is classified as Other Logic ICs.Without external influences, it consumes 3μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.A resistance of 15Ohm is used to operate it.At 85°C, the maximum operating temperature of this signal switch is acceptable.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.Device specifications specify 5.5V as the maximum supply voltage for the signal switches.Device specifications require that the minimum supply voltage is 4V.The mux switch configuration contains 1 elements.It uses the logic IC MULTIPLEXER AND DEMUX/DECODER as its core logic unit.When a voltage supply of 3μA is delivered to the load, stability of the multiplexers can be maintained.

SN74CBT3251PWRG4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
MULTIPLEXER AND DEMUX/DECODER as the logic IC
Operating with the supply current of 3μA

SN74CBT3251PWRG4 Applications


There are a lot of Texas Instruments SN74CBT3251PWRG4 Signal Switches / Multiplexers / Decoders applications.

  • Time division multiplexing system
  • CNC machines
  • Textile mills
  • Enabling block of memory depending on address in memory chips
  • Automation system
  • Decimal decoder
  • PCIe
  • LVDS
  • Communication system
  • CPU memory location identification

Write a review

Note: HTML is not translated!
    Bad           Good